Konica make KTS Sulzer Let-off Conversion System:
The mechanical types of let-offs are most frequently used and are combinations of clutches and brakes. Due to contamination and wear of these mechanical parts, there can be a high degree of irregularities in density, particularly with high speed weaving machines. Where conventional let-offs do not satisfy the ever increasing demand, the electronically controlled let-off becomes a necessity.
Konica LET OFF CONVERSION can also Replace:
KSA Let Off, Pansonic Let Off, Ergatron Let Off, Grobe Let Off Sytems & can also be adapted with Gear Box & Motor according to customer’s specification.
KONICA LET OFF CONVERSION can be used for warp beams in low position for wide weaving machines
- for SULZER Projectile P7200, P7150, P7100, PU, TW-11
- for RUTI-C
- for RUTI F2001
- for SAURER S 400
- for Dornier Rapier
- for other weaving machines on request
KTS Sulzer Letoff is a Warp Let-off System with frequency converter, which is intended for letting off from warp beam or feeding unit. During this operation, the warp tension is kept constant. The drive is mounted either on the weaving machine or on a frame positioned behind the weaving machine.
The let-off starts with a machine running signal; the speed of the let-off motor is controlled by a Linear proximity switch or original Sensor mounted on the whip roller system and an internal speed memory. An alarm signal switches the weaving machine off in case of over tightened warp or any other error.
- simple handling
- customized adaptation of let-off device with gear combination
- programmer available for various parameter programming and trouble-shooting
Voltage 1x230 VAC /- 10%
Frequency 50/60 Hz /- 10%
Power consumption max 1,5 kVA
Motor output performance 750 or 370 Watt
View Complete details